Cooper Clubman (R55) L4-1.6L (N12) (2010)
Body Emblem: Service and Repair
51 14 ... Instructions For Attaching Number/Letter Designation Combination
51 14 ... Instructions For Attaching Number/Letter Designation Combination
NOTE:
-
The model designation is attached with adhesive and can not be reused.
-
The model designation must be attached at room temperature >±18 °C.
-
The model designation must be removed at stove-enameling temperatures exceeding 80 °C.
NOTE: The following work steps are described using the "316 i" as the example.
Removing:
Coat nylon string or strong yarn with tensides (e.g. washing-up liquid).
Cut through adhesive layer and remove model designation (1) from rear lid (2).
Remove remainder of adhesive layer with adhesive remover (sourcing reference: BMW Parts Service).
Assembly:
Number and letter combinations (1) of the model designation are not connected to each other and are supplied on a carrier film (2).