Cooper Clubman (R55) L4-1.6L (N12) (2010)
Disconnect plug connection (1).
Unfasten screws (4 and 5).
Tightening torque 51 11 7AZ.
COOPER S only:
Release clamp (2) and detach air duct (3).
Installation:
Headlight lug for screw (5) must not butt against front panel during installation.
Insert special tool 00 2 271 on left and right in sleeve (1).
If necessary, turn special tool 00 2 271 until screw can be inserted and tighten down.
Unscrew nuts (2).
Tightening torque 51 11 3AZ.
Installation:
Remove special tool 00 2 271 only when front panel is completely installed.