Cooper Convertible (R52) L4-1.6L (W10) (2005)
/l4-1.6l_(w10)/Page-1957004.png)
Release screws (1) on front axle support at front.
Installation:
Tightening torque 31 11 1AZ See: Specifications/Mechanical Specifications/Suspension/System Specifications.
Release screws (1) from control arm bracket.
Installation:
Tightening torque 31 11 6AZ See: Specifications/Mechanical Specifications/Suspension/System Specifications.
Tighten down screw (1) only after all other screws on the front axle support have been tightened down.
This will prevent the casing from being subjected to torsion stress.
