mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Removing and Installing or Replacing Base Plate on Left or Right|Page 12562 > < Body - Convertible Top Design Changes|Page 12559
Page 1
background image

Convertible Top Latch: Service and Repair
Removing and Installing or Replacing Base Plate on Left or Right

54 34 140 - Removing and installing or replacing base plate on left or right

Necessary preliminary tasks:

-

Remove panel See: Interior Moulding / Trim/Trim Panel/Service and Repair/Removing and Installing or Replacing Trim For Roof Pillar At Front
(A-Pillar), Left or Right for roof pillar at front

Release screws (1).
Tightening torque 54 34 3AZ See: Specifications/54 34 Motor-Driven Convertible Top (Electrical Components).

Installation:

Adjust See: Adjustments/Adjusting Convertible Top base plate (2).

Removing and Installing or Replacing Base Plate on Left or Right|Page 12562 > < Body - Convertible Top Design Changes|Page 12559