Cooper Convertible (R52) L4-1.6L (W10) (2005)
/l4-1.6l_(w10)/Page-1280001.png)
Brake Bleeding: Service and Repair
Bleeding Brake System with ABS/ASC+T
34 00 048 - Bleeding brake system with ABS/ASC+T
Note:
Read and comply with General Information See: Service and Repair.
Refer to operating instructions for the relevant bleeder unit.
Charging pressure should not exceed 2 bar.
Connect bleeder unit to expansion tank and switch on.
Bleeding rear axle brake circuit:
Connect bleeder hose and collecting container to bleeder valve at rear right wheel brake.
Open bleeder valve and flush until clear brake fluid emerges without bubbles.
Close bleed valve.
Follow the same procedure for rear left wheel brake.
