mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Customer Interest for Oil Filter Adapter: > < Oil Filter, Engine|Service and Repair|Page 3467
Page 1
background image

Oil Filter Adapter: All Technical Service Bulletins
Engine - Oil Seepage From Filter Housing Area

SI M 11 01 06
Engine

February 2006
Technical Service

SUBJECT
Oil Seepage from the Filter Housing Area

MODEL
R50, R52, R53 with W10, W11

SITUATION
Oil seepage is detected in the area of the oil filter housing.

CAUSE
Dimensional tolerances of the sealing o-ring of the oil filter housing cover.

CORRECTION
On a customer complaint basis, replace the filter housing o-ring with P/N 11 42 7 562 249.

Important:

Make sure that the o-ring groove in the filter housing cover is cleaned and free of deposits, and a thin coat of engine oil is applied to the o-ring seal
prior to its installation.

PARTS INFORMATION

WARRANTY INFORMATION

Covered under the terms of the MINI New Vehicle Limited Warranty.

For the appropriate labor operation/allowance refer to KSD.

Customer Interest for Oil Filter Adapter: > < Oil Filter, Engine|Service and Repair|Page 3467