Cooper Convertible (R52) L4-1.6L (W10) (2005)
/l4-1.6l_(w10)/Page-363003.png)
Determine actual ride level (A).
Attach tape measure to rim flange at bottom middle and measure to lower edge of special tool 32 4 110 See: Steering and Suspension/Steering/Tools and
Equipment/32 4 110 Adapter.
Chassis/Wheel Alignment Without Load
32 00 155 - Chassis/wheel alignment without load
Note:
-
Read and comply with General chassis definition See: Electronic Wheel Alignment (With KDS)
-
Read and comply with notes on Chassis allocation via optional extra
-
Read and comply with More detailed information See: Description and Operation on chassis alignment system (Beissbarth).
-
Check compliance with test conditions See: Specifications/Normal Position, bring vehicle to a stop if necessary.
-
If necessary, prepare lifting platform.
-
Drive vehicle onto lifting platform.
-
If necessary, switch on chassis alignment system.
-
Enter vehicle data and customer data
-
Enter tire pressure and tread depth
-
Measure and enter ride height
-
Attach quick-clamping holder/quick-clamping unit and pickup to vehicle
-
Mount spoiler adapter if necessary
-
Install brake tensioner.
-
Perform input measurement in accordance with equipment manufacturer's instructions.
-
Compare specified values with actual values
