Cooper Convertible (R52) L4-1.6L (W10) (2005)
Brake Bleeding: Service and Repair
Bleeding Brake System with DSC
34 00 050 - Bleeding brake system with DSC
Note:
Read and comply with General Information See: Brakes and Traction Control/Service and Repair.
When replacing or repairing, observe the filling and bleeding instructions for the following parts:
1. Tandem brake master cylinder
2. DSC hydraulic unit
3. and components/connecting lines which are fitted between these assemblies.
(Brake fluid changer connected to max. 2 bar filling pressure).
After completing work: Carry out final check with DIS under menu item "Service functions".
Contrary to the instructions in the DIS, the bleeding routine must be restarted on each wheel.
A second person is needed to help carry out this work.
Connect DIS.
Call up service function "Bleeding ABS/DSC Hydraulics".
Connect brake fluid changer to expansion tank and switch on.
Note:
Check relevant Operating Instructions for each device.
Charging pressure should not exceed 2 bar.