mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 7593 > < Diagram Information and Instructions|Page 7591
Page 1
background image

Ignition Coil: Testing and Inspection

12 13 ... - Normal oscillogram (M, S, W engines only)

1. start of ignition voltage peak
2. Level of ignition voltage
3. Level of combustion voltage
4. Period of combustion
5. Combustion curve characteristics
6. Start of decay process
7. Termination oscillations

Secondary voltage patterns, beside one another:
Evaluation of ignition voltage peaks at idle speed (this example shows an engine with 4 cylinders).

Note:

The display of ignition voltage spikes is approx. 20-25% lower than the real value.
The uniformity of all cylinders to each other is more important than the height of ignition voltage peaks. Differences of 3000 ... 4000 V are permitted.
In event of greater differences, refer to 
"Further fault patterns with evaluation".

Diagram Information and Instructions|Page 7593 > < Diagram Information and Instructions|Page 7591