Cooper Convertible (R52) L4-1.6L (W10) (2005)
/l4-1.6l_(w10)/Page-1079001.png)
Ignition Coil: Service and Repair
12 13 513 - Replacing ignition coil
Necessary preliminary tasks:
-
Switch off ignition
-
Read out fault memory of DME control unit
-
Check stored fault messages
Unlock plug (1) and remove.
Detach ignition cable (2) from ignition coil.
Release screws (3).
Installation:
Screw (1) and spacer tube (2) are only available as a single set.
Check insulating rings (3), replace if necessary.
Tightening torque 12 13 1AZ See: Specifications.