Cooper Convertible (R52) L4-1.6L (W10) (2005)
/l4-1.6l_(w10)/Page-1753003.png)
Installation Note:
Before screwing down airbag control unit (3), make existing negative leads (5) are correctly positioned.
Tightening torque 65 77 1AZ See: Air Bag Systems/Specifications/65 77 Airbag control unit and airbag sensors.
Raise airbag control unit (3) slightly and disconnect plug connection (4).
Remove airbag control unit (3).
Pierce carpet (1) at marked points.
Feed cable ties (2) through holes created and pull carpet (1) together exactly.
