Cooper Convertible (R52) L4-1.6L (W10) (2005)
/l4-1.6l_(w10)/Page-227001.png)
Camshaft Position Sensor: Service and Repair
12 14 537 - Replacing camshaft pulse generator
Necessary preliminary tasks:
-
Switch off ignition
-
Read out fault memory of DME control unit
-
Check stored fault messages
-
Remove right engine support arm
Unlock and disconnect pulse generator plug.
Release screw (1), remove pulse generator (2).
Installation Note:
Replace sealing ring and coat with antiseize agent.
Tightening torque 13 62 1AZ.
Note:
Now clear the fault memory.
