Cooper Convertible (R52) L4-1.6L (W10) (2005)
Alignment: Service and Repair
Chassis/Wheel Alignment Without Load
32 00 155 - Chassis/wheel alignment without load
Note:
-
Read and comply with General chassis definition See: Electronic Wheel Alignment (With KDS)
-
Read and comply with notes on Chassis allocation via optional extra
-
Read and comply with More detailed information See: Description and Operation on chassis alignment system (Beissbarth).
-
Check compliance with test conditions See: Specifications/Normal Position, bring vehicle to a stop if necessary.
-
If necessary, prepare lifting platform.
-
Drive vehicle onto lifting platform.
-
If necessary, switch on chassis alignment system.
-
Enter vehicle data and customer data
-
Enter tire pressure and tread depth
-
Measure and enter ride height
-
Attach quick-clamping holder/quick-clamping unit and pickup to vehicle
-
Mount spoiler adapter if necessary
-
Install brake tensioner.
-
Perform input measurement in accordance with equipment manufacturer's instructions.
-
Compare specified values with actual values
-
If necessary, adjust front axle and rear axle
-
Perform output measurement in accordance with equipment manufacturer's instructions.
-
Carry out steering angle sensor adjustment
-
Save and print out test record.
-
Remove chassis/wheel alignment system
-
Drive vehicle off lifting platform.