Cooper Convertible (R52) L4-1.6L (W10) (2005)
/l4-1.6l_(w10)/Page-1567004.png)
Lever bead with tire iron (1) over rim flange.
Important!
Avoid damaging the rim by using a suitable tire iron with protective coating.
Make sure there is sufficient lubrication between bead and rim flange; apply antiseize compound if necessary.
Allow fitting machine to rotate slowly and relieve tension on holding-down element and rollers during rotation.
Removal - lower bead:
Important!
Apply sufficient antiseize compound between rim and tire.
Position fitting head (1) in direction of rotation before sensor (2).
Position tire iron (3) on fitting head (1).
Tire bead must be positioned entirely in well opposite fitting head (1).
Lever bead with tire iron (1) over rim flange.
Important!
Avoid damaging the rim by using a suitable tire iron with protective coating.
Allow fitting machine to rotate slowly.
