Cooper Convertible (R52) L4-1.6L (W10) (2005)
Necessary preliminary tasks:
-
Remove both front wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair/Removal and Replacement/Removing or Installing
Front or Rear Wheel
-
Remove underbody protective plate. See: Body and Frame/Splash Guard
Important!
Use four screws (2) and washers to fix both front brake discs (1) in position.
Apply foot brake and firmly tighten screws (2) to 60 Nm.
Screws (2):
M12 x 1.5 x 25 mm
Installation:
Remove screws (2) after filling with oil.
Check screw (3).
Tightening torque 34 11 1AZ. See: Brakes and Traction Control/Specifications/34 11 Front Brake
Remove oil drain plug (1) from transmission sump.
Drain off transmission fluid.