Cooper Convertible (R57) L4-1.6L (N12) (2009)
PROCEDURE TO VIEW OR RESET SERVICE ITEMS USING THE TRIP RESET BUTTON
1. Sit in car, close door and turn ignition on (KL15).
2. Press and hold the Trip Reset button located on the Tachometer for 10 seconds.
3. The upper display in the Tachometer will be illuminated with a Service Item (example: An oil can is the designation for Oil Service). The lower
display in the Tachometer will indicate the remaining time or mileage left for that Service Item (example: 14000). Pressing the BC (Board
Computer) button repeatedly on the end of the turn signal stalk repeatedly will allow the display to scroll through all of the Condition Based
Service items.
4. To reset, press and hold the BC button again and the lower display screen will indicate "RESET".
5. Pressing the BC button again will reset the service displayed in the upper window only. Repeat the procedure for any additional service reset
needs.
Note:
The CBS service items for both State Vehicle Safety Inspection and State Emissions Inspection cannot be viewed in the Instrument Cluster.
These State Inspections can be viewed on the CBS Menu in the Control Display or by DISplus / GT1.