Cooper Convertible (R57) L4-1.6L (N12) (2009)
Backup Lamp Switch: Service and Repair
Replacing Reversing Light Switch - M/T
23 14 ... - Replacing reversing light switch
Necessary preliminary tasks:
-
Remove resonance body and intake duct See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner
Housing/Service and Repair (N12 only)
-
Remove intake neck for intake filter housing (N14 only)
-
Remove intake duct(W16 only)
Disconnect plug connection (1) on reverse gear switch.
Remove reverse gear switch.
Tightening torque 23 14 1AZ. See: Specifications/Mechanical Specifications/Manual Transmission/Transaxle/System Specifications/Electrical Fittings
Note:
Illustration similar