Cooper Convertible (R57) L4-1.6L (N12) (2009)
/l4-1.6l_(n12)/Page-293001.png)
Alignment: Service and Repair
Adjusting Toe-in and Camber on Front Axle
32 00 610 - Adjusting toe-in and camber on front axle
Important!
Changes in axle geometry caused by accidents must under no circumstances be rectified by camber adjustment!
Note:
Camber and toe-in influence each other. Adjust the toe-in first in order to simplify the adjustment procedure.
The centering pin may only be removed if the camber is outside the specified tolerance after toe adjustment.
Adjusting toe:
Move steering wheel into straight-ahead position and secure with steering wheel arrester.
Release screw (1).
Adjust toe-in to specified value by turning tie rod at hexagon (2).
Installation Note:
Make sure that gaiter (3) of tie rod does not turn as well.
Installation Note:
Tightening torque 32 21 2AZ See: Steering and Suspension/Steering/Steering Arm/Specifications.
