Cooper Convertible (R57) L4-1.6L (N12) (2009)
/l4-1.6l_(n12)/Page-723001.png)
Engine Control Module: Testing and Inspection
Coding Control Module (DME/DDE)
12 14 700 - Coding control module (DME/DDE)
Switch off ignition.
Connect MoDiC or DIS/GT1 Tester.
Switch on ignition.
Select "Coding" program.
For subsequent procedure, follow instructions in MoDiC or DIS/GT1 Tester.
Carry out adjustment of following control units:
-
EWS (electronic immobilizer)
-
DME (Digital Motor Electronics) or
-
DDE (Digital Diesel Electronics)
Refer to "Diagnosis and Coding" service information bulletins on subject of coding.
