mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Variable Valve Timing Solenoid|Service and Repair|Page 3881 > < Variable Valve Timing Actuator Position Sensor|Service and Repair
Page 1
background image

Variable Valve Timing Solenoid: Service and Repair

11 36 655 - Removing and installing/replacing both solenoid valves (N12)

Important!

Always check that the solenoid valves are clean during removal and installation.
Possible malfunction if valves are contaminated:
-

Rough running.

-

OBD fault entry.

-

Exhaust emission behavior. 

-

Low engine power.

Necessary preliminary tasks:

-

Remove acoustic cover See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Removing and
Installing/Replacing Acoustic Cover

Disconnect plug connection for solenoid valve (3) - inlet.
Release screw (1).
Remove solenoid valve (2) for inlet side.

Variable Valve Timing Solenoid|Service and Repair|Page 3881 > < Variable Valve Timing Actuator Position Sensor|Service and Repair