Cooper Convertible (R57) L4-1.6L (N12) (2009)
Engine Control Module: Testing and Inspection
Programming Control Unit (DME/DDE)
12 14 705 - Programming control unit (DME/DDE)
Switch off ignition.
Connect MoDiC or DIS/GT1 Tester.
Switch on ignition.
Select "Programming".
For subsequent procedure, follow instructions in MoDiC or DIS/GT1 Tester.
Carry out adjustment of following control units:
-
EWS (electronic immobilizer)
-
DME (Digital Motor Electronics) or
-
DDE (Digital Diesel Electronics)
Refer to "Diagnosis and Coding" service information bulletins on subject of programming.