Cooper Convertible (R57) L4-1.6L (N12) (2009)
/l4-1.6l_(n12)/Page-1237009.png)
A cableless remote display can be supplied on request. The remote control keys are only active during measuring and adjustment (not for customer
data input, or if selecting a vehicle or editing the setpoint data etc.). The following displays are supported by the remote control:
- Measured value with setpoint / actual comparison and tolerance bar
- Steering graphics for steering routines
- Live overview of the track / camber values with a setpoint / actual comparison
- Rim run-out compensation
3.6 Measuring sensors with CCD camera
The measuring sensors are each equipped for automatic measurement with two CCD cameras and their own processor for the cableless infrared
transmission of data with integrated batteries. Benefits:
- No temperature deviation
- Very high measuring resolution (the track could theoretically be measured in angular seconds)
- Single track range of more than ± 9 degrees for the constant display of toe-in when changing the tie-rod ends
- Exact system accuracy, i.e. when carrying out measurements at the vehicle following rim run-out compensation, the toe-in and camber measurements
are accurate to 2 angular minutes
3.7 BMW Quick-acting clamp
