Cooper Convertible (R57) L4-1.6L (N12) (2009)
/l4-1.6l_(n12)/Page-1005002.png)
Drive a hole into radial shaft seal (1) using a center punch.
Important!
Do not use a drill as drillings may result in transmission malfunction.
Screw in special tool 23 0 490 See: Tools and Equipment/23 0 490 Extractor.
Drive out radial shaft seal (1) with impact weight (2).
Installation:
Coat sealing lips of radial seal with gear oil.
Push radial seal onto special tool 23 0 380 and drive firmly home.
