mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Windshield Washer Control Module > < Diagram Information and Instructions|Page 9425
Page 1
background image

Washer Fluid Level Switch: Service and Repair

61 31 492 - Replacing level switch for windscreen washer system

Necessary preliminary tasks:

-

Partially remove front left wheel arch trim See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service and Repair

Note:

Catch any escaping washer fluid if necessary.

Disconnect plug connection (1).
Pull level switch for windscreen washer system (3) in direction of arrow out of fluid reservoir for windscreen washer system.

Installation:

Grommet (2) must not be damaged.
First install grommet (2) in fluid reservoir for windscreen washer system.
Make sure grommet (2) and level switch for windscreen washer system (3) are correctly seated on fluid reservoir for windscreen washer system.
Fill fluid reservoir.

Windshield Washer Control Module > < Diagram Information and Instructions|Page 9425