Cooper Countryman (R60) L4-1.6L (N16) (2011)
/l4-1.6l_(n16)/Page-6001.png)
Engine Control Module: All Technical Service Bulletins
Engine Controls - Poor/Fluctuating Idle After Start Up
SI M12 01 11
Engine Electrical Systems
April 2011
Technical Service
SUBJECT
N16 - Poor or Fluctuating Idle After an Engine Start
MODEL
R55, R56, R57, and R60 with the N16 engine produced 10/21/10 to 12/1/2010
SITUATION
The engine idle quality is rough or fluctuating afier the engine is started.
This can occur regardless of engine temperature, but may be more noticeable when cold.
CAUSE
DME software error
CORRECTION
Do not replace any parts.
Only cars at a current integration level of R056-10-11-511 are affected.
The DME software solution was introduced into production (integration R056-10-11-512) beginning in December 2010.
The service solution is to program the vehicle using ISTA/P 2.40.1 or later.
Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.
For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales Portal / Service / Workshop Technology / Vehicle
Programming.
