Cooper JCW (R56) L4-1.6L Turbo (N14) (2010)
/l4-1.6l_turbo_(n14)/Page-271003.png)
Release screws (1) for folding pack holder.
Tightening torque
5AZ Head airbag, retaining clip and panel to bracket
- B-pillar
R50 / R53 ............................................................................................................................................................................................................ 6 Nm
Holder, folding pack for head airbag and ramp, to body (B-pillar)
R56 / R55 ............................................................................................................................................................................................................. 8 Nm
Installation:
Replace Torx screws and insert with Loctite.
Unlock plug connection (1) and disconnect.
Release screws (2) and remove holder with gas generator.
Installation:
Replace Torx screws and insert with Loctite.
Gas generator is coded against incorrect installation.
IMPORTANT: Make sure that folding pack cannot be installed twisted.
Folding pack must not be damaged.
Holders of folding pack must not be damaged.
Installation:
