Cooper JCW Clubman (R55) L4-1.6L Turbo (N14) (2009)
/l4-1.6l_turbo_(n14)/Page-602001.png)
Front Crankshaft Seal: Service and Repair
11 14 005 - Replacing front crankshaft radial seal (N14)
Special tools required:
-
11 9 601 See: Tools and Equipment/11 9 600 Installer
-
11 9 602 See: Tools and Equipment/11 9 600 Installer
-
11 9 603 See: Tools and Equipment/11 9 600 Installer
Important!
PTFE ring is supplied with a supporting ring.
Supporting ring is required as an installation tool; do not touch inner surface of PTFE ring with fingers (risk of damage!).
Necessary preliminary tasks:
-
Remove A/C line from compressor.
-
Remove vibration damper.
Important!
Do not release central bolt.
If the central bolt is released, the sprocket wheels of the timing chain and the oil pump will no longer be non-positively connected to the crankshaft. The
camshafts can warp in relation to the crankshaft (risk of damage!).
