Cooper JCW Clubman (R55) L4-1.6L Turbo (N14) (2009)
/l4-1.6l_turbo_(n14)/Page-1470006.png)
Lever sensor spare.
Fitting - lower bead:
Grip wheel and lay on tire.
Important!
Apply a light coating of antiseize compound to fitting head.
Position fitting head (1) as pictured.
Important!
Make sure tire is correctly positioned on fitting head. Position bead in relation to fitting head (1) in accordance with equipment manufacturer's
instructions.
Position sensor (RDC) (3) and valve min. 10-15 cm before traction point/catching point (2).
Sensor must not be subjected to load.
Allow fitting machine to rotate slowly.
Guide tire in direction of rotation and press towards well.
