mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Tools and Equipment > < Removing and Installing Side Airbag|Page 1370
Page 2
background image

Note:

Press Torx screwdriver (1) upwards.
In this way, the retaining clip is pressed upwards and the airbag unit unlocked.

Warning!

Risk of injury!
Airbag unit may only be set down with the airbag itself facing upwards.

Disconnect plug connection (1).
Disconnect ground cable (2) and remove airbag unit.

Tools and Equipment > < Removing and Installing Side Airbag|Page 1370