Cooper JCW Convertible (R57) L4-1.6L Turbo (N14) (2010)
NOTE:
Window glass (1) with installed seals (3) or moulded-on surrounds:
-
Moisten cutting wire (4) and seals (3) on window glass (1) with water
-
Insert cutting wire (4) in bend (without kinking) between window glass (1) and body aperture (2)
Protecting vehicle passenger compartment:
-
To avoid damage and possible dirt contamination, protect A-pillars, roof and dashboard trim panel (3) by means of plastic washer (1)
-
Always carry plastic washer (1) between respective wire (2) being tightened and trim panel components
Attaching wire in hoisting winch with double coil:
-
Bend over cutting wire end (1) and insert into slot of spool (2)
-
Repeat process with other end of wire (1) and second spool (2)
-
Wind cutting wire (1) onto spools by hand until cutting wire (1) is under slight tension
Starting the dismantling:
NOTE: Spools can only be rotated in one direction.