Cooper S (R53) L4-1.6L SC (W11) (2004)
/l4-1.6l_sc_(w11)/Page-2227002.png)
Normal bump stops up to build date 02/2003:
Adjust bump stops on left/right by turning.
Lay a thin piece of cardboard (1) on contact surface of bump stop and close rear lid.
Pull out cardboard (1), a slight resistance must be felt in the process.
Check alignment of rear lid and rear lid lock, readjust if necessary.
Soft bump stops from build date 03/2003:
Adjust bump stops on left/right by turning.
Adjust bump stops to dimension (A).
A = 35 mm
Check alignment of rear lid and rear lid lock; if necessary, screw in bump stops by approx. 1 mm.
