mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Removing and Installing/Replacing Front Left or Right Entrance Cover Strip (Inside)|Page 13158 > < Rear Shelf|Description and Operation|Page 13153
Page 1
background image

Scuff Plate: Service and Repair
Removing and Installing/Replacing Front Left or Right Entrance Cover Strip (Inside)

51 47 000 Removing And Installing/Replacing Front Left Or Right Entrance Cover Strip (Inside)

Special tools required:

-

00 9 311

Remove bolt (1) securing seat belt slider bar.

Install hint:
Tightening torque ........................................................................................................................................................................................................  36 Nm

Release seat belt slider bar (2).
Remove front seat.

Partially release door seal along entrance strip.
Partially release rear trim panel.
Ensure clip (1) is not damaged prior to installation.

Passenger side only:

Removing and Installing/Replacing Front Left or Right Entrance Cover Strip (Inside)|Page 13158 > < Rear Shelf|Description and Operation|Page 13153