Cooper S (R53) L4-1.6L SC (W11) (2004)
Crankshaft Main Bearing Seal: Service and Repair
Replacing Crankshaft Radial Seal
Special tools required:
^
00 5 500
^
11 8 220
^
11 8 230
^
23 0 490
Remove transmission.
Remove flywheel.
Remove radial seal with special tool 23 0 490
Clean cylinder block and crankshaft seal surfaces.
Install hint:
Fit special tool 11 8 220 to crankshaft.
Slide radial seal on to special tool 11 8 220
Install hint:
Use special tool 00 5 500 in conjunction with special tool 11 8 230 fit radial seal into cylinder block.