Cooper S (R53) L4-1.6L SC (W11) (2004)
/l4-1.6l_sc_(w11)/Page-642001.png)
Front Crankshaft Seal: Service and Repair
Replacing radial seal below timing case cover
Special tools required:
^
11 8 320
^
11 8 241
^
11 8 242
^
11 8 270
^
11 8 290
Remove vibration damper. Refer to Harmonic Balancer - Crankshaft Pulley See: Cylinder Block Assembly/Harmonic Balancer - Crankshaft
Pulley/Service and Repair
Fit special tool 11 8 270 into crankshaft.
Fit special tool 11 8 290 on crankshaft and screw in until it is rigidly connected with the radial sealing ring (1).
Remove radial seal (1) by tightening bolt.
Remove special tool 11 8 270 and replace with special tool 11 8 242 and tighten.
