Cooper S (R53) L4-1.6L SC (W11) (2004)
/l4-1.6l_sc_(w11)/Page-648003.png)
Install timing chain on camshaft gear.
Install camshaft gear on camshaft flange and refit retaining bolt.
Camshaft gear to camshaft
M12 ................................................................................................................................................................................................................. 102 Nm
1. Camshaft timing mark aligns with single plated link.
2. Camshaft gear.
3. Left timing chain guide.
4. Right timing chain guide.
5. Timing chain tensioner.
6. Crankshaft gear.
7. Chain.
8. Crankshaft timing mark aligns with double plated link.
Caution:
^
If engine is not correctly timed up, damage will result.
^
Do not use an impact wrench on installation for tightening the camshaft gear bolt.
^
Damage to the camshaft timing pin can result.
^
Use a hand wrench only.
Install hint:
Install new sealing washers to cylinder head closure plugs and refit.
Pulse generator, sensor to cylinder head
M6 ...................................................................................................................................................................................................................... 9 Nm
