Cooper S (R53) L4-1.6L SC (W11) (2004)
Ultrasonic-welded connectors:
Ultrasonic-welded connectors (1) can be identified by the welds (2) on their longitudinal side.
The contacts of these connectors cannot be replaced. Replace plug completely.
NOTE:
Special tools referred to in the repair instructions below are contained in the following special tool kits:
Release and press-out tool
61 1 150
Repair instructions for opening plug housings and removing
Plug system D 1.5/D 2.5:
-
Circular plugs, 7-, 8-pin, System D 2.5
-
Circular plugs, 13-pin, System D 2.5
-
Circular plugs, 20-pin, System D 2.5
-
Circular plugs, 4-, 7-, 10-, 12-, 25-pin, System D 1.5/D 2.5
-
In-line plugs, 15-pin, System D 2.5
-
In-line plugs, 8-, 12-pin, System D 2.5
-
In-line plugs, 30-pin, System D 2.5
-
In-line plugs, 20-pin, System D 2.5