mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Intake Air Temperature Sensor|Diagrams > < Intake Air Temperature Sensor|Specifications
Page 1
background image

Intake Air Temperature Sensor: Locations

TMap Sensor (MINI COOPER)

The TMAP (Temperature and Manifold Absolute Pressure) sensor contains a Manifold Absolute Pressure (MAP) Sensor and an Intake Air Temperature
Sensor.

Intake Air Temperature Sensor is built into the TMap sensor.

TMap Sensor (MINI COOPER S)

On the MINI COOPER S the pressure differential is measured across the supercharger to determine the manifold air density. To measure this differential
two sensors are fitted, one on either side of the supercharger.

The TMAP is fitted on the manifold pressure side and has the same hardware specification as the MINI COOPER sensor but the maximum pressure
range is 250 Kpa.

 The MAP sensor is fitted upstream of the TMAP between the supercharger and the throttle body and measures the atmospheric pressure. This sensor is
the same as the MINI COOPER TMAP but will not have the temperature sensor. The TMAP sensor is located in the intake manifold where it is
exposed to higher than atmospheric pressures as produced by the supercharger. The MAP sensor is located between the supercharger and the EDR, a
location not effected by additional pressures from the supercharger.

Intake Air Temperature Sensor|Diagrams > < Intake Air Temperature Sensor|Specifications