Cooper S (R53) L4-1.6L SC (W11) (2004)
/l4-1.6l_sc_(w11)/Page-1683001.png)
Alignment: Service and Repair
Adjusting Rear Axle (With KDS)
Adjusting Rear Axle (With KDS)
Special Tools Required:
^
32 4 200
If camber is not within specification.
Refer to Troubleshooting on the rear axle (alignment check).
Caution: If unable to bring toe-in within specified values.
Refer to Troubleshooting on the rear axle (alignment check).
Adjusting toe in:
Release screws (1) and (2) approximately 1 1/2 turns at bearing pedestal.
Attach special tool 32 4 200 to screw (2).
Turn special tool and adjust toe-in to specified value.
Compliance housing to body
M12 1.5 66 bolt ............................................................................................................................................................................................... 100 Nm
