Cooper S (R53) L4-1.6L SC (W11) (2004)
/l4-1.6l_sc_(w11)/Page-1784003.png)
Remove nut (1) and remove bolt (2).
Release column in direction arrow shows.
Install hint:
Replace self-locking nut.
Lower universal joint clamping nut
M8 Nut .............................................................................................................................................................................................................. 22 Nm
Note: Use only once
CVT only:
Slacken cable retaining nut (1).
Squeeze cable retaining clips (2) and remove cable from abutment bracket (3).
Release cable (4).
Remove bolts (1) securing engine lower stabilizer (2) and remove.
Lower stabilizer to oil sump holder ........................................................................................................................................................................... 100 Nm
Lower stabilizer to front axle .................................................................................................................................................................................... 100 Nm
Locate gearbox hydraulic jack (1) to subframe jacking point (2).
