Cooper S (R53) L4-1.6L SC (W11) (2004)
Remove left and right front subframe center bolts (1) to body.
Front subframe centre to body
M12 x 1,75 x 18 .............................................................................................................................................................................................. 100 Nm
Note: Self forming.
Remove bolts (1) securing left and right compliance bush housings (2) to body.
Compliance bush housing to body
M10 Screw ..................................................................................................................................................................................... 59 Nm + 90° ± 15°
Install hint:
Tighten only after all other subframe bolts have been tightened, to avoid tension on the housing.
Remove all bolts (1) securing rear of subframe to body.
Front subframe rear to body
M12 x 1.75 x 61.7 ........................................................................................................................................................................................... 100 Nm
Note: Self forming.
Lower subframe guiding PAS reservoir down through engine compartment.
Also guide cable out from between subframe and steering rack (CVT only).