Cooper S (R53) L4-1.6L SC (W11) (2004)
Torque Converter: Service and Repair
24 40 012 - Removing and installing / replacing torque converter (AISIN)
Special tools required:
-
00 2 550
-
24 4 260
Important!
After completion of work, check transmission fluid level .
Use only approved transmission oil.
Failure to comply with this instruction will result in serious damage to the transmission.
Necessary preliminary tasks:
-
Remove automatic transmission See: Service and Repair/Removing and Installing Transmission (AISIN)
Screw special tool 24 4 260 onto torque converter.
Remove torque converter.
Note:
Do not damage shaft seal when removing torque converter.