mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Removing and Installing/Replacing Bottom Ornamental Strip For Windscreen, Left or Right|Page 15549 > < Removing and Installing/Replacing Bottom Ornamental Strip For Windscreen, Left or Right
Page 1
background image

Windshield Moulding / Trim: Service and Repair
Removing and Installing/Replacing Trim on A-Pillar, Left or Right

a

51 31 045 Removing And Installing/Replacing Trim On A-pillar, Left Or Right

Important:  After cementing the windscreen, at least 6 hours must be allowed to elapse before fitting the A-pillar trim covers (windscreen
breakage).

Release door seal in A-pillar area.
Release screws (1 and 2).
Unclip trim (starting at bottom) in direction of arrow.

Installation:
Trim for A-pillar:

-

must be behind lower trim strip of windscreen

-

must not be damaged, replace if necessary

If necessary, release clips (2) from A- pillar (1).
Clips (2) and shaped part (3) must not be damaged.

Build date up to 09/2003:
Retrofit shaped part (3).

Removing and Installing/Replacing Bottom Ornamental Strip For Windscreen, Left or Right|Page 15549 > < Removing and Installing/Replacing Bottom Ornamental Strip For Windscreen, Left or Right