mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Wiper Relay > < Diagram Information and Instructions|Page 15901
Page 1
background image

Wiper Pivot: Service and Repair

Removing And Installing Complete Wiper Console

Remove cowl panel cover.

Release Nut (1).

Install hint:
Ensure bracket is located correct to grommet.

Remove screws (2).

Install hint: (All fixings)
Tightening Torque 10 Nm.

Disconnect connector of motor and remove wiper mechanism/motor.

Wiper Relay > < Diagram Information and Instructions|Page 15901