Cooper S (R56) L4-1.6L Turbo (N14) (2009)
/l4-1.6l_turbo_(n14)/Page-1298001.png)
License Plate Bracket: Service and Repair
51 11 159 Installing/Replacing Number/License Plate (Without Plate Holder)
Installation:
-
Use a template to ensure easy and safe fitting of front number plate.
-
Different versions depending on the national and model specifications are featured on the template.
-
Sourcing reference, see BMW / MINI Parts Service.
If necessary, cut template to match national specification (1).
Lay template on number plate and centre.
Select drilling holes (2) to match national and model specifications, then mark and drill/punch.
If necessary, deburr bore holes on number plate.
Hold number plate template on bumper trim and centre with position holes (1).
Select mounting holes (2) to match national and model specifications on template and mark on bumper trim.
IMPORTANT: Do not pilot-drill.
Mount number plate with number plate screws (part number.: 07143448498) on bumper trim.
Sourcing reference, see BMW / MINI Parts Service.
