Cooper S (R56) L4-1.6L Turbo (N14) (2009)
Lever out protective cap (1) and release screw underneath.
Tightening torque 51 43 2AZ
Detach panel (2) from clip (5) towards inside.
Only if replacing, release belt strap (3) (see last work step).
Installation:
If necessary, replace faulty clip (5).
Make sure door seal (4) is correctly seated.
Version with light package:
Release cable holder (1) and disconnect plug connection (2).
Installation:
Make sure LED (3) is correctly seated.
Replacement:
Release screw (1).