Cooper S (R56) L4-1.6L Turbo (N14) (2009)
/l4-1.6l_turbo_(n14)/Page-376001.png)
Drive Belt: Service and Repair
11 28 012 Replacing Drive Belt (Without A/C System)
11 28 012 Replacing drive belt (without A/C system)
Necessary preliminary tasks:
^
Remove right wheel arch line.
Cut through ribbed V-belt (1) with a suitable tool (2).
Position supplied tool (1) on vibration damper (see arrow).
Attach installation tool in direction of arrow and slide further in direction of arrow.
Bring installation tool (1) on vibration damper into installation position.
