Cooper S (R56) L4-1.6L Turbo (N14) (2009)
/l4-1.6l_turbo_(n14)/Page-1621019.png)
Detach tear-off lip (3) from rubber frame (1).
If adhesive leaks over tear-off lip (3), this area must be cut out partially.
Cut (4) as illustrated in area (A) on left/right.
To facilitate installation, coat rubber frame (1) and body aperture with water.
Install rubber frame (1).
2 Aluminium strip
Replacement of rubber frame with removed windscreen:
Fit rubber frame (1) with tear-off lip (3).
Do not cut gripping lip (4).
Slide new rubber frame (1) onto upper edge of windscreen, ensuring correct alignment.
2 Aluminium strip
51 31 ... Remove Windscreen With "Roll Out 2000"
51 31 ... Remove Windscreen With "Roll Out 2000"
Windscreen removal system "Roll Out 2000"
