Cooper S (R56) L4-1.6L Turbo (N18) (2011)
Body Emblem: Service and Repair
51 14 110 Removing and Installing/Replacing Rear Model Designation
51 14 110 Removing And Installing/Replacing Rear Model Designation
IMPORTANT: The Instructions for number/letter combination cementing serve as the basis for these repair instructions and must be followed without
fail.
Fitting dimensions (R50/R52/R53/R56):
Mark position of model designation with adhesive tape using dimensions (A and B). Position model designation on marking and stick on.
R50/R52/R53 :
A
B
One
194 mm
63 mm
One D
194 mm
68.5 mm
Cooper/Cooper S 194 mm
48 mm
R56:
A
B
One
238 mm
46 mm
Cooper
238 mm
52 mm