Cooper S (R56) L4-1.6L Turbo (N18) (2011)
Press pin (1) together and press out.
Release nuts (2) and remove clutch master cylinder.
Installation:
Replace self-locking nuts.
Tightening torque 21 52 3 AZ.
Detach locking clip (1).
Installation:
Check bearing bushes of clutch pedal and replace if necessary.
Lightly grease bearing bushes.
Check retaining clip (1) and replace if necessary.
Make sure retaining clip (1) is correctly engaged.
Disengage return spring (2) and remove clutch pedal (3).
Modify brake light switch.