Cooper S (R56) L4-1.6L Turbo (N18) (2011)
Determine and mark centre of access hole as follows:
1. Align edge of impression (1) to side.
2. Distance to flank (2) - (A) = 14 mm.
Release screw that becomes visible behind access hole.
Installation:
Seal access hole with plug.
Part Number 51 71 1 801 066
Drill 20 mm dia. access holes on left (1) and right (2) in glovebox opening as described in the following.
Left access hole:
Determine and mark centre of access hole as follows:
1. Distance to flank (1) - (A) = 16 mm.
2. Distance to profile corner (2) - (B) = 26 mm.